{"id":13665,"date":"2022-11-03T09:57:58","date_gmt":"2022-11-03T09:57:58","guid":{"rendered":"https:\/\/wordpress-866225-2999446.cloudwaysapps.com\/?page_id=13665"},"modified":"2025-07-26T13:02:47","modified_gmt":"2025-07-26T13:02:47","slug":"engineering-analysis-and-calculations","status":"publish","type":"page","link":"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/","title":{"rendered":"Engineering Analysis and Calculations"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

One of the most critical challenges during the design phase is the difficulty of accurately predicting how a product or system will behave under real-life operating conditions. These uncertainties can lead to performance issues, unexpected failures, and increased costs during later stages.\n\nTo mitigate such risks early, we apply a wide range of engineering analysis methods\u2014starting from the conceptual design stage.\n\nAt SimuTek, our core objective is to minimise design and development risks by leveraging advanced engineering techniques. Along with structural and computational fluid dynamics (CFD) simulations, we perform thorough checks for static, dynamic, vibration, impact, and forming to make sure your products are reliable, safe, and efficient before they are actually made.<\/span><\/p><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"Image\"<\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"Image\"<\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"Image\"<\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Structural Analysis<\/strong>\n

\nStatic Analysis
\nDynamic Analysis
\nLinear and non-linear analysis
\nMetal Forming analysis
\nVibration and Shock Analysis
\nImpact and Fall Analysis
<\/span><\/p><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

External Flow Analysis<\/strong>\n

\nBuilding aerodynamic analysis (Facade load calculations)
\nCar aerodynamic analysis
<\/span><\/p><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Internal Flow Analysis<\/strong>

\n\nTurbomachinery (fan, pump, wind turbine performance and efficiency calculations)
\nHVAC (Heating, ventilation, air conditioning)
\nHeat transfer calculations
<\/span><\/p><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Combustion

<\/strong>\n\nEnvironmental problems
\nSmoke distribution
\nPollution rates<\/span><\/p><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"Image\"<\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"Image\"<\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"Image\"<\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"Image\"<\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Sheet Metal Forming<\/strong>\n

\nFormability Analysis\n\nDrawing and Expansion Optimization\n\nTool & Die Design\n\nSurface Development & Trimming\n\nStretch Forming & Bending\n\nHydroforming\n\n\nRollforming & Flexforming\n\nSpringback Prediction & Compensation\n<\/span><\/p><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Bulk Forming<\/strong>\n

\nCold and Hot Forming
\nExtrusion
\nRolling
\nHeat treatment calculations
\nDetection of errors in forming
<\/span><\/p><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Explicit Analysis<\/strong>\n

\nVehicle collision analysis
\nDrop tests
\nDamage analysis
\nBlast analysis\n<\/span><\/p><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\"Image\"<\/div><\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

One of the most critical challenges during the design phase is the difficulty of accurately predicting how a product or system will behave under real-life operating conditions. These uncertainties can lead to performance issues, unexpected failures, and increased costs during…<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"content-type":"","footnotes":""},"class_list":["post-13665","page","type-page","status-publish","hentry"],"yoast_head":"\nEngineering Analysis and Calculations - Simutek Engineering<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Engineering Analysis and Calculations - Simutek Engineering\" \/>\n<meta property=\"og:description\" content=\"One of the most critical challenges during the design phase is the difficulty of accurately predicting how a product or system will behave under real-life operating conditions. These uncertainties can lead to performance issues, unexpected failures, and increased costs during...\" \/>\n<meta property=\"og:url\" content=\"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/\" \/>\n<meta property=\"og:site_name\" content=\"Simutek Engineering\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/Simutek.Engineering\" \/>\n<meta property=\"article:modified_time\" content=\"2025-07-26T13:02:47+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/simutek.com.tr\/en\/wp-content\/uploads\/2022\/11\/mah1.jpg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:site\" content=\"@SimuTek_CAE\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/\",\"url\":\"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/\",\"name\":\"Engineering Analysis and Calculations - Simutek Engineering\",\"isPartOf\":{\"@id\":\"https:\/\/simutek.com.tr\/en\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/simutek.com.tr\/en\/wp-content\/uploads\/2022\/11\/mah1.jpg\",\"datePublished\":\"2022-11-03T09:57:58+00:00\",\"dateModified\":\"2025-07-26T13:02:47+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/#primaryimage\",\"url\":\"https:\/\/simutek.com.tr\/en\/wp-content\/uploads\/2022\/11\/mah1.jpg\",\"contentUrl\":\"https:\/\/simutek.com.tr\/en\/wp-content\/uploads\/2022\/11\/mah1.jpg\",\"width\":320,\"height\":230,\"caption\":\"mah1\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Anasayfa\",\"item\":\"https:\/\/simutek.com.tr\/en\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Engineering Analysis and Calculations\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/simutek.com.tr\/en\/#website\",\"url\":\"https:\/\/simutek.com.tr\/en\/\",\"name\":\"Simutek Engineering\",\"description\":\"optimum engineering solutions\",\"publisher\":{\"@id\":\"https:\/\/simutek.com.tr\/en\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/simutek.com.tr\/en\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/simutek.com.tr\/en\/#organization\",\"name\":\"Simutek Engineering\",\"url\":\"https:\/\/simutek.com.tr\/en\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/simutek.com.tr\/en\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/simutek.com.tr\/wp-content\/uploads\/2022\/11\/kalite-yonetim-belgesi.jpg\",\"contentUrl\":\"https:\/\/simutek.com.tr\/wp-content\/uploads\/2022\/11\/kalite-yonetim-belgesi.jpg\",\"width\":1000,\"height\":600,\"caption\":\"Simutek Engineering\"},\"image\":{\"@id\":\"https:\/\/simutek.com.tr\/en\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/Simutek.Engineering\",\"https:\/\/x.com\/SimuTek_CAE\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Engineering Analysis and Calculations - Simutek Engineering","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/","og_locale":"en_US","og_type":"article","og_title":"Engineering Analysis and Calculations - Simutek Engineering","og_description":"One of the most critical challenges during the design phase is the difficulty of accurately predicting how a product or system will behave under real-life operating conditions. These uncertainties can lead to performance issues, unexpected failures, and increased costs during...","og_url":"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/","og_site_name":"Simutek Engineering","article_publisher":"https:\/\/www.facebook.com\/Simutek.Engineering","article_modified_time":"2025-07-26T13:02:47+00:00","og_image":[{"url":"https:\/\/simutek.com.tr\/en\/wp-content\/uploads\/2022\/11\/mah1.jpg","type":"","width":"","height":""}],"twitter_card":"summary_large_image","twitter_site":"@SimuTek_CAE","twitter_misc":{"Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/","url":"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/","name":"Engineering Analysis and Calculations - Simutek Engineering","isPartOf":{"@id":"https:\/\/simutek.com.tr\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/#primaryimage"},"image":{"@id":"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/#primaryimage"},"thumbnailUrl":"https:\/\/simutek.com.tr\/en\/wp-content\/uploads\/2022\/11\/mah1.jpg","datePublished":"2022-11-03T09:57:58+00:00","dateModified":"2025-07-26T13:02:47+00:00","breadcrumb":{"@id":"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/#primaryimage","url":"https:\/\/simutek.com.tr\/en\/wp-content\/uploads\/2022\/11\/mah1.jpg","contentUrl":"https:\/\/simutek.com.tr\/en\/wp-content\/uploads\/2022\/11\/mah1.jpg","width":320,"height":230,"caption":"mah1"},{"@type":"BreadcrumbList","@id":"https:\/\/simutek.com.tr\/en\/engineering-analysis-and-calculations\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Anasayfa","item":"https:\/\/simutek.com.tr\/en\/"},{"@type":"ListItem","position":2,"name":"Engineering Analysis and Calculations"}]},{"@type":"WebSite","@id":"https:\/\/simutek.com.tr\/en\/#website","url":"https:\/\/simutek.com.tr\/en\/","name":"Simutek Engineering","description":"optimum engineering solutions","publisher":{"@id":"https:\/\/simutek.com.tr\/en\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/simutek.com.tr\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/simutek.com.tr\/en\/#organization","name":"Simutek Engineering","url":"https:\/\/simutek.com.tr\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/simutek.com.tr\/en\/#\/schema\/logo\/image\/","url":"https:\/\/simutek.com.tr\/wp-content\/uploads\/2022\/11\/kalite-yonetim-belgesi.jpg","contentUrl":"https:\/\/simutek.com.tr\/wp-content\/uploads\/2022\/11\/kalite-yonetim-belgesi.jpg","width":1000,"height":600,"caption":"Simutek Engineering"},"image":{"@id":"https:\/\/simutek.com.tr\/en\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/Simutek.Engineering","https:\/\/x.com\/SimuTek_CAE"]}]}},"_links":{"self":[{"href":"https:\/\/simutek.com.tr\/en\/wp-json\/wp\/v2\/pages\/13665","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/simutek.com.tr\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/simutek.com.tr\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/simutek.com.tr\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/simutek.com.tr\/en\/wp-json\/wp\/v2\/comments?post=13665"}],"version-history":[{"count":15,"href":"https:\/\/simutek.com.tr\/en\/wp-json\/wp\/v2\/pages\/13665\/revisions"}],"predecessor-version":[{"id":15741,"href":"https:\/\/simutek.com.tr\/en\/wp-json\/wp\/v2\/pages\/13665\/revisions\/15741"}],"wp:attachment":[{"href":"https:\/\/simutek.com.tr\/en\/wp-json\/wp\/v2\/media?parent=13665"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}